PIPE END EXPANDING MACHINE (PEEM)   (Click on photo for larger view) Click here to see a general view of the Pipe End Expanding Machine PRD Pipe End Expanding Machines are specifically developed for SAW pipe mills to form spigot type pipe ends that conform to AWWA standard applications. With PRD PEEM's both spherical and semi-spherical pipe ends are possible. The range covered with PRD PEEM's are: Diameter 609 mm to 3 048 mm Pipe Length 6 m to 25 m Material Thickness 9 mm to 25 mm Max, Hydraulic Pressure 300 Bar Material Grade Up to X 80 PRD PEEM's are equipped with PLC and PC controls which enable the machine to start in "learn mode" then repeat the expanding process in automatic operation as long as pipes of the same characteristics are being produced. Main PEEM components are i. Main Body with Die Holders, 8 total ii. Main Cylinder, with 480 mm Diameter and 600 mm stroke iii. Die Holding Cylinders, 8 total iv. Electrical and Hydraulic Systems v. Control Panel   Click here to see a general view of the Pipe End Expanding Machine [Home]  [About PRD]  [Products]  [Press Releases]  [Contact Us] [Latest News]  © Copyright 1997-2008, Pacific Roller Die Company, Inc. All Rights Reserved.