© Copyright 1997-2011, Pacific Roller Die Company, Inc. All Rights Reserved.
Designed by:N.Izgi-2011
LET DOWN

This arm lowers the pipe from the upper to the lower portion of the rail line.
Stop Index-(Plain)
Stop Index-(V type)
Let Down
Let Down
Kick Out
Kick Out
KICK OUT

The purpose in this assembly is to transfer pipe from lower lines to upper ones. Kick-out systems are used to get the pipe from conveyors onto rail.
BRIDGE

The mechanism builds a bridge between rail lines. It acts
simply as a bridge to transfer pipes from one line to another.
Bridge
Bridge
CONVEYORS

There are two types of conveyors used in the system: one is idle conveyor and the other one is powered conveyor.
Coated Conveyors
Conveyor Line
TURNING ROLLS

This unit moves the pipe longitudinally in a direction of
travel perpendicular to the rails.
Turning Roll
Turning Roll
ANTI ROLL BACK STOP
This device consists of an eccentric gate (or pivoted arm),
a pivot pin mounted on a steel plate, and a stop bar.
The purpose is to allow the pipe to travel along the rails in
one direction only.

PIPE STOP PLATE
The purpose for the use of this equipment is just to stop the
pipes at the end of  the rails and to prevent the pipes from
falling down.
Anti Roll Back Stop
Anti Roll Back Stop
Pipe Stop Plate
Pipe Stop Plate
STOP INDEX

It has two positions: one is stop position, when the hydraulic cylinder is closed, and the other is the push position, when the cylinder is open.
MATERIAL HANDLING EQUIPMENTS